Dynamic 8mm half rope with high cut resistance and Dry treatment.
This revolutionary half rope for alpine climbing and mountaineering provides significantly better cut resistance due to an extra aramid sheath between the polyamide outer sheath and the core to protect the rope better from sharp rock and metal edges. In the event of a fall, this aramid sheath stretches owing to its extra-long construction, and the rope performs just as dynamically as any other Mammut rope. Handling and abrasion resistance remain the same, but cut resistance is increased. Whether you are mountaineering, single- or multi-pitch climbing or ice climbing – with a Core Protect Rope safety is much higher.
- Significantly more cut-resistant under load on sharp edges due to its additional aramid sheath.
- Double certified half and twin rope.
- Achieves < 2% in UIAA water absorption tests.
- Ready to climb - comes tangle-free and does not need to be uncoiled before first use.
- Abrasion-resistant centre mark.
- Optimised abrasion resistance due to Dry finishing.
- Lasting effectiveness in repelling water and dirt according to UIAA for maximum safety in the toughest conditions.