Laser cut stainless steel keyhole rivet hangers are designed for use on rivets or hangerless bolts and are stronger and more durable than traditional cable rivet hangers. The beefy 0.090-thick stainless steel hangers inspire confidence and make it possible to utilize the full strength of a rivet or bolt. Compared to cable rivet hangers, keyhole hangers are shorter in height, enabling a climber to gain maximum reach from a rivet or bolt. Both the 3/8" and 1/4" - 5/16" hangers are designed for added security such that once clipped with a karabiner, the hangers cannot come off of a rivet or bolt until the karabiner is unclipped from the hanger. The size refers to the width of the internal slot, 3/8" = ca 11mm and 5/16" = ca 9mm.
Moses keyhole hangers are tumbled to create a smooth finish that feels good in the hand and they fit a wide variety of anchors, including 1/4", 5/16", and 3/8" round or hex-head rivets and bolts. For backcountry use, a few keyhole hangers can provide lightweight insurance for use on the unexpected hangerless bolt, should the need arise. Designed for use, and tested on Yosemite's big walls.