A traditional bolt anchor chain designed for any type of route. It consists of two fixing points, a hanger Fixe1 at the top end and a Fixe 2 at lower end. They are available Ecotri zinc plated for indoor use and in 316L stainless steel for an outdoor environment. Two sizes are available, for 10mm and 12mm diameter bolts.
The design locates the anchor bolts in a vertical orientation. When placed in good rock the anchor simultaneously loads both bolt placements. This eliminates the “Shock Load” possibility if one anchor bolt were to fail and is far superior to anchors that locate the anchor bolts across a horizontal plane.
- Hangers have rounded inner edge for less wear on the karabiners.
- They direct the karabiner for an optimal roof work.
- Conical washer: better control of the tightening torque.
- Three anti-rotation pins.
- Optimised surface for full contact.
- TIG welding. Better resistance to corrosion.
- Reduction of the number of chain links to three: less critical points.
- 7mm link-rod diameter.
- Useful length: 185mm.
Material: Ecotri zinc plated or 316L stainless steel.
Inside diameter: 33mm.
Breaking strength: 25kN.
Standards: CEN: EN795:2012, EN959:2018.
Codes Stainless: 10mm, V40410; 12mm, V40412.
Codes Ecotri: 10mm, V40210; 12mm, V40212.
Weight: c 439g.